The general size specifications of bedding products are generally divided into three categories: 1. single (child), 2. double ordinary specifications, 3. double enlarged specifications
Generally, the high-end four-piece set for children contains a pillowcase and a cushion cover, and the size is generally 40 * 40CM (internal diameter)
2. General specifications for two people:
Sheets: 230 * 250CM or 245 * 245CM or 250 * 250CM
(The slight size difference mainly depends on the width of the fabric used by the manufacturer. For example, if the width of the fabric is 235CM, then if the bed sheet is the entire width, the largest of the two sides can only be 230CM (because there are still Processing for sewing), the length of the other two sides can be determined casually.)
Quilt cover: 200 * 230CM Pillowcase: 75 * 48CM (inner diameter) (two)
This specification can be used for 1.5m or 1.8m beds. Take the four-piece bed sheet with 230 * 250CM as an example. It is laid on a 1.5m bed with 40CM on each side and 50CM on the foot of the bed. 245 * 250CM is 47.5CM on both sides and 50CM on the foot of the bed. Generally, sheets of this size will be designed with rounded corners, otherwise two corners will be dragged on the ground. Similarly, the size of 230 * 250 is used in The 1.8-meter bed is 25 cm on each side and 50 cm on the foot of the bed. Whether this size is suitable for the 1.8-meter bed depends mainly on the size of the quilt you choose. If it is 200 * 230, it is very suitable ; If it is 220 * 240 or other sizes, you must choose another specification.
3. Double increase specification: bed sheet: 240 * 270CM, quilt cover 220 * 240CM pillowcase 74 * 48CM (inner diameter) (two)
Because the bed linen of this size is relatively large, it is generally only used for beds of 1.8 * 2 meters or wider.