+86-19962878880
Sitemap | RSS | XML   
Industry news

How to clean bedding and maintenance points

2020-05-15
1. For the washing of bedding, except for special materials and those that cannot be washed (such as silk), in general, you can pour neutral detergent into the water of the washing machine. Put it in the bedding afterwards, soaking time should not exceed 10 minutes. Because the water temperature is too high or the detergent is not evenly dissolved, soaking for too long may easily cause unnecessary fading. At the same time, light-colored products should be washed separately from dark-colored products during washing to avoid dyeing. After cleaning, it can be dried in an outdoor ventilated place. If you want to use the dryer, please choose low temperature drying. The temperature should not exceed 35 ℃ to avoid excessive shrinkage.

In short, you should carefully read the washing instructions about the product before cleaning. For example, some products with decorations and some luxury multi-piece sets. Before washing, be sure to remove lace or pendant decorations to avoid damage.

2. In general, three sets of bedding need to be replaced in turn for one bed, and they need to be cleaned once every 1-2 months. Before the first use, it can be rinsed with water once to wash off the surface pulp and parts that may be incompletely dyed and dyed. It will be softer to use and will not easily fade during future cleaning.

3. When storing, please clean it first, dry it thoroughly, fold it neatly, and put a certain amount of camphor pills (do not directly contact the product). It should be stored in a dark place with low humidity and good ventilation. Quilt products that have not been used for a long time can be dried in the sun before being reused to restore their fluffiness.

4. A few points that need special attention:

①Leather products can be dried before being collected, but they should not be exposed to direct sunlight (prone to discoloration), and can be completely dried in a ventilated place. In order to increase the flexibility of the leather, a soft cloth can be used to coat the surface with a thin layer of glycerin.

② Except for the single-hole fiber pillow, all others can be washed, but because of its thickness, it must be fully dried and allowed to dry completely so as not to affect reuse. It is usually best to use the quilt cover to avoid the trouble of washing.

③ Linen products can not be rubbed or twisted hard when washing (because the fiber is brittle and easy to fluff, affecting the appearance and life)

④ When collecting cotton and linen products, pay attention to keeping the environment clean and clean to prevent mildew. Light and dark products should be stored separately to prevent shadows and yellowing.

⑤ White silk products cannot be placed in camphor balls or placed in camphor wooden boxes, otherwise they will turn yellow.