Sitemap | RSS | XML   
Industry news

Towel quilt maintenance and cleaning method

Towel maintenance method:

If there is no obvious dirt on the towel, the new towel need not be cleaned. Wrap it with a breathable item (such as a finishing bag), put a camphor ball to prevent insects, and then store it in a ventilated and dry wardrobe. Under heavy pressure. There is a lot of rain in summer and autumn. After the rainy season, it is best to take out the towel and let it dry to prevent mildew; if you find mildew, you can wipe it with a cotton ball dipped in alcohol, then wipe it clean with a clean wet towel, and store it properly after drying. . But be careful not to expose to the sun, otherwise the new quilt may fade into the old quilt.

If you want to wash the towel and quilt, pay attention to the water temperature is not too high, and use a neutral detergent, after washing to dry, you can gently pat on the hanger, which can restore the filler to the fluffiness, but also help the filler completely dry, Prevent mold. For cleaning towels, it is best to use a special towel cleaning agent.

Because they are neutral, they can reduce the damage to protein fibers, and have excellent washing power and protective conditioning. After washing, they can maintain the gloss and fluffiness of the towel fabric. When the towel is washed, first soak the towel in clean water, then put 20-30 grams of towel cleaning agent, mix it with 4 kg of warm water into the lotion, soak for 20 minutes, and clean the dirt on the surface with a soft brush , Then rinse with clean water. In short, as long as you are carefully maintained, when winter comes, you can take the lead in putting on a new towel quilt to enjoy comfort and warmth.

Towel quilt cleaning method:

(1) If the towel is not too dirty, dry cleaning can be used. After the oil stains are removed, wipe the area where the gasoline is stained with a dry towel. After the gasoline has evaporated, you can wear it.
(2) If the towel is stained more, only the whole washing method is adopted. First soak the towel in cold water for 20 minutes. Pour about 2 tablespoons of washing powder into clean water with a water temperature of 20-30 ° C and mix well, then put in a towel that is removed from the clean water and squeezed out of water, soak for 5-10 minutes. Take the towel out of the washing liquid, lay it flat on a clean platen, and gently scrub with a soft brush dipped in the washing liquid from the inside out.

After scrubbing, put the towel in the washing liquid and rinse it a few times, then rinse it twice in 30 ° C warm water, and then rinse it three times in clean water to completely remove the detergent residual liquid. After drying, pat lightly with a small stick to restore the towel to its original fluffy softness.